Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 QoS Policy Configuration
3-2
3.2 Configuring QoS Policy
The procedure for configuring QoS policy is as follows:
1)
Define a class and define a group of traffic classification rules in class view.
2)
Define a traffic behavior and define a group of QoS actions in traffic behavior view.
3) Define a policy and specify a traffic behavior corresponding to the class in policy
view.
4)
Apply the QoS policy in Ethernet port view/port group view.
3.3 Introduction to QoS Policies
Table 3-1
QoS policies
Policy name
Corresponding class
Related command
Accounting
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
accounting
TP
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
car
Traffic filtering
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
filter
Traffic mirroring
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
mirror-to
Nested VLAN tag
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
nest
Traffic redirect
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
redirect
Priority marking
Use the
if-match match-criteria
command to define the class as required
for the policy to be associated with.
remark
3.4 Configuring a QoS Policy
3.4.1 Configuration Prerequisites
z
The name and the rules of the class to which the policy is to be bound to are
determined.
z
The traffic behavior name and actions in the traffic behavior in the policy are
determined.
