H3C S3600V2 SERIES, Layer 2-Lan Switching Configuration Manual

Page: 229 / 281

214
Step Command Remarks
2. Create a class and enter class
view.
traffic classifier tcl-name
[ operator and ]
Repeat these steps to create one
class for each local SVLAN and
foreign CVLAN pair.
3. Specify a foreign CVLAN as a
match criterion.
if-match customer-vlan-id vlan-id
4. Specify a local SVLAN as a match
criterion.
if-match service-vlan-id vlan-id
5. Return to system view.
quit
6. Create a traffic behavior and enter
traffic behavior view.
traffic behavior behavior-name
Repeat these steps to configure
one CVLAN marking action for
each local SVLAN and foreign
CVLAN pair.
7. Configure a CVLAN marking
action to replace the foreign
CVLAN ID with a local CVLAN ID.
remark customer-vlan-id vlan-id
8. Return to system view.
quit
9. Create a QoS policy and enter
QoS policy view.
qos policy policy-name N/A
10. Associate the class with the
behavior.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
class-behavior associations.
Configuring a downlink policy for the customer-side port
The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
To configure a downlink policy for the customer-side port:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and enter class
view.
traffic classifier tcl-name
[ operator and ]
Repeat these steps to create
one class for each local
CVLAN and SVLAN pair.
3. Specify a local CVLAN as a match
criterion.
if-match customer-vlan-id vlan-id
4. Specify a local SVLAN as a match
criterion.
if-match service-vlan-id vlan-id
5. Return to system view.
quit
6. Create a traffic behavior and enter
traffic behavior view.
traffic behavior behavior-name
Repeat these steps to create
one VLAN marking behavior
for each local CVLAN and
SVLAN pair.
7. Configure a CVLAN marking
action to replace the local CVLAN
ID with a foreign CVLAN ID.
remark customer-vlan-id vlan-id
8. Configure an SVLAN marking
action to replace the local SVLAN
ID with a foreign SVLAN ID.
remark service-vlan-id vlan-id
9. Return to system view.
quit
10. Create a QoS policy and enter
QoS policy view.
qos policy policy-name N/A