Operation Manual – 802.1x and System Guard
H3C S3100-52P Ethernet switch
Chapter 3 HABP Configuration
3-2
To do...
Use the command...
Remarks
Enable HABP
habp enable
Optional
By default, HABP is
enabled.
Configure the current
switch to be an HABP
server
habp server vlan vlan-id
Required
By default, a switch
operates as an HABP
client after you enable
HABP on the switch. If you
want to use the switch as
a management switch,
you need to configure the
switch to be an HABP
server.
Configure the interval to
send HABP request
packets.
habp timer interval
Optional
The default interval for an
HABP server to send
HABP request packets is
20 seconds.
3.3 HABP Client Configuration
HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Follow these steps to configure an HABP client:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enable HABP
habp enable
Optional
HABP is enabled by
default. And a switch
operates as an HABP
client after you enable
HABP for it.
3.4 Displaying and Maintaining HABP Configuration
To do...
Use the command...
Remarks
Display HABP
configuration and status
display habp
Available in any view
Display the MAC address
table maintained by HABP
display habp table
Available in any view
