2
Figure 1 Attaching an ESD wrist strap (S12516X-AF switch)
(1) ESD jack (with an ESD sign)
Installing MPUs
CAUTION:
•
If you are not to install an MPU in an MPU slot, keep the filler panel in the slot.
•
Before you install an MPU in the chassis, make sure the connectors on the MPU are not broken
or blocked.
•
When you install an MPU, avoid damaging the connectors on the MPU.
•
To prevent a filler panel from being drawn into the chassis when fan speed is high, use both
hands to grasp the filler panel by its two sides during filler panel installation and removal on an
operating switch.
An S12501X-AF switch does not require MPUs.
Unless otherwise stated, the term "MPU" in this document refers to MPUs and cloud SEUs.
For the compatibility between the switch and the MPUs, see "Appendix B FRUs and compatibility
matrixes."
You can install one MPU, or two MPUs for redundancy on the switch. If you are to install one MPU,
install it in either of the MPU slots.