35
To install a CXP module:
1.
Unpack the CXP module.
Do not touch the golden plating of the module.
2.
Correctly orient the CXP module and make sure the pull latch is on top of the CXP module.
Gently push the module into the slot until it has firm contact with the slot.
Figure 36 Installing a CXP module (S12516X-AF switch)
Connecting an SFP+/QSFP+/QSFP28/QSFP+ to SFP+ DAC
cable
CAUTION:
When you connect a fiber cable, make sure the bend radius of the cable is no less than eight times
the fiber diameter.
The cables are hot swappable.
Use SFP+ DAC cables to connect SFP+ ports, QSFP+ DAC cables to connect QSFP+ ports,
QSFP28 DAC cables to connect QSFP28 ports, and QSFP+ to SFP+ DAC cables to connect
QSFP+ and SFP+ ports.
To connect an SFP+/QSFP+/QSFP28/QSFP+ to SFP+ DAC cable:
1.
Unpack the cable.
2.
Plug the cable connector into the port. Make sure the cable connector is correctly oriented.
