4-1
4
Cabling recommendations
Routing network cables
The cable management brackets are installed on the two sides of the interface module section. As a
best practice, route network cables from the left and right sides.
Routing power cords
When you route power cords, take consideration of the layout of the equipment room, including the
locations of the power distribution cabinet, AC power receptacles, and lightning protection box.
Ensure safety when routing power cords.
The power supplies of the device are located on the far left and far right of the rear panel. As a best
practice, route power cords for the left power supplies from left of the device and route power cords
for the right power supplies from right of the device.
