2-1
2
Installing the device
IMPORTANT:
Keep the packages of the device and the components for future use.
Confirming installation preparations
Before you install the device, verify that:
•
You have read "Preparing for installation" carefully and the installation site meets all the
requirements.
•
A 19-inch rack is ready for use and the rack has enough space to accommodate the device.
For information about how to install a rack, see the rack installation guide.
•
The rack is sturdy and reliably grounded.
•
No obstruction inside or outside the rack interfere with installation of the chassis.
•
The heaviest device is placed at the bottom of the rack.
•
The rack can provide power as required by the device. For information about the system power
consumption and power module specifications, see
H3C S12500G-EF Switch Series Hardware
Information and Specifications
.
•
The total height of the devices to be installed is not higher than the available installation height
of the rack and enough clearance is reserved for cable routing.
•
The device is ready for installation and has been carried to a place near the rack and
convenient for moving.