21
Ctrl+C: Display Copyright
Enter your choice(0-8):
4.
Enter
4
and press
Y
to delete the next-startup configuration files.
Enter your choice(0-8): 4
Because the password recovery capability is disabled, this operation can
cause the configuration files to be deleted, and the system will start up
with factory defaults. Are you sure to continue?[Y/N] Y
Setting...Done.
The extended BootWare menu is displayed again:
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Ethernet SubMenu |
|<3> File Control |
|<4> Restore to Factory Default Configuration |
|<5> Skip Current System Configuration |
|<6> Skip Authentication for Console Login |
|<7> BootWare Operation Menu |
|<8> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-8):
5.
Enter
0
to reboot the device. The device will reboot with the factory defaults.
Enter your choice(0-8): 0
System is Starting...
Press Ctrl+D Into xmodem mode
Press Ctrl+T to start memory test
Booting Normal Extend Bootware
Press Ctrl+V to start heavy memory test
After the device starts up, configure a new console login password. You can also configure a
different login authentication mode.
<Sysname> system-view
[Sysname] line aux 1/1
[Sysname-line-aux1/1] authentication-mode password
[Sysname-line-aux1/1] set authentication password simple abc123
[Sysname-line-aux1/1] return
6.
Save the running configuration to use the configuration at the next reboot.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N] :y
Please input the file name(*.cfg)[flash:/default.cfg]
(To leave the existing filename unchanged, press the enter key):default.cfg
Validating file. Please wait....
Saved the current configuration to mainboard device successfully.
Dealing with Telnet password loss
1.
Log in to the device through the console port.
