41
Installing a fan tray
CAUTION:
•
The fan trays are heavy. Do not try to move a fan tray by yourself.
•
Hold a fan tray by the bottom when moving it. Never attempt to lift a fan tray with its handle because the
handle is not designed to support weight. Doing so might result in bodily injury or damage to the
module.
The S12504 has one fan tray. Each of the S12508 and the S12518 has two fan trays. They are installed
in the same way.
To install a fan tray:
1.
Wear an ESD-preventive wrist strap and make sure it is properly grounded.
2.
Unpack the fan tray.
3.
Remove the blank panel from the slot to be used.
4.
Lift the fan tray and push it into the slot until it is firmly seated in the slot.
5.
Fasten the captive screws on the front panel of the fan tray.
Figure 39
Installing a fan tray (for the S12504)
Summary of Contents for S12500 Series
Page 40: ...30 Figure 28 Installing an upper expansion cable management bracket 1 2 3 4 5 6 7...
Page 109: ...99 Figure 74 Replacing a card for the S12504 A Card to be removed B Card to be installed...
Page 149: ...139 Figure 85 Loopback operation on an optical transceiver...
Page 164: ...154 Figure 100 Example of a device label...
