14
Figure 14 Connecting an E1 cable
Connecting an Ethernet copper cable
1.
Connect one end of the cable to the Ethernet copper port on the router. Connect the other end
of the cable to the Ethernet copper port on the peer device.
The fixed ports on the router are MDI/MDIX autosensing. You can use straight-through or
crossover network cables to connect the ports.
2.
Examine the port LED on the router. For more information about the LEDs, see "
."
Figure 15 Connecting an Ethernet copper cable
Connecting an Ethernet optical fiber
WARNING!
Do not stare into any open apertures of operating transceiver modules or optical fiber connectors.
The laser light emitted from these apertures might hurt your eyes.
