6
(3) Loosen the releasable cable tie and remove the power cord.
(4) Holding the power module handle with one hand, press the latch on the power
module towards the handle direction with your thumb, and pull the power
module part way out of the slot. Supporting the power module bottom with the
other, pull the power module out of the slot slowly.
(5) Put the removed power module on an antistatic mat or in its original package.
If you are not to install a new power module, install a filler panel in the slot to
prevent dust from entering the chassis.
Copyright © 2023, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
