Manual version: 6PW105-20190315
BOM: 3123A1BU
i
H3C SecPath M9000 NSQM1FWDFGC1 firewall
module
1 Identifier
The module identifier NSQM1FWDFGC1 is at the upper right corner of the front panel.
2 About the module
The NSQM1FWDFGC1 firewall module is developed for H3C SecPath M9000 security gateways.
The module provides features including firewall, VPN, content filtering, and NAT. By using this
module on an M9000 gateway, you can enhance network security capabilities without changing the
network topology.
3 Specifications
The module has one console port, one USB port, one GE copper port, and a hard disk slot.
Figure 1 Front panel
(1) Hard disk slot
(2) Console port (CONSOLE)
(3) GE copper port (10/100/1000BASE-T)
(4) USB port (reserved)
(5) Hard disk LED (HD)
(6) System status LED (SYS)
(7) Ejector lever
(8) Captive screw
Table 1 Module specifications
Item Specification
Flash
8 MB Nor Flash
Memory
Four memory slots
Standard configuration: 32 GB (four 8-GB VLP RDIMMs)
You must install the DDR3 SDRAMs in pairs and each pair must have the
same specifications.
Micro SD card
One built-in Micro SD card slot
Standard configuration: 8 GB
Dimensions (H × W × D)
40 ×399 × 352 mm (1.57 × 15.71 × 13.86 in)
Power consumption
180 W to 260 W
Weight
4.8 kg (10.58 lb)
Hot swapping
Supported
