17
IMPORTANT:
•
Use H3C-certified USB devices.
•
The USB port does not support hot-swapping of the USB modem from Sierra Wireless.
To connect a USB device to the USB port:
1.
Remove the cap of the USB device.
2.
Insert the USB device to the USB port.
Figure 19
Connecting a USB device
Connecting a console cable and setting terminal
parameters
Connecting a console cable
CAUTION:
When using a console cable to connect a PC to the router, first connect the DB-9 end of the console
cable to the PC serial port. Then connect the RJ-45 connector of the console cable to the router console
port.
To connect a console cable, as shown in
:
1.
Select a console terminal. The console terminal can be an ASCII terminal with an RS232 serial
port or a PC. (A PC is more commonly used.)
2.
Connect the DB-9 connector (female) of the console cable to the RS-232 serial port of the
console terminal and the RJ-45 connector to the console port of the router.
