68
display pppoe-server session summary
Use
display pppoe-server session summary
to display summary PPPoE session information.
Syntax
Centralized devices in standalone mode:
display pppoe-server session summary
[
interface interface-type interface-number
]
Distributed devices in standalone mode:
display pppoe-server
session
summary
{
slot
slot-number
|
interface interface-type
interface-number
}
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify an interface for centralized devices in standalone mode, the command displays summary
PPPoE session information for all interfaces.
slot
slot-number
: Specifies a card by its slot number. If you do not specify a card, the command
displays summary PPPoE session information for all cards. (Distributed devices in standalone
mode.)
Usage guidelines
Summary PPPoE session information on a phy sical interface can be displayed only on the card
where the interface resides. Summary PPPoE session information on a logical interface can be
displayed on all cards.
Examples
# Display summary PPPoE session information on GigabitEthernet 1/0/1.
<Sysname> display pppoe-server session summary interface gigabitethernet 1/0/1
Total PPPoE sessions: 2
Ethernet interface: GE1/0/1 Session ID: 1
PPP interface: VA1 State: PADR_RCVD
Remote MAC: 00e0-1500-7100 Local MAC: 00e0-1400-7300
Service VLAN: N/A Customer VLAN: N/A
Ethernet interface: GE1/0/1 Session ID: 2
PPP interface: VA2 State: OPEN
Remote MAC:00e0-1600-7200 Local MAC: 00e0-1400-7400
Service VLAN: 2 Customer VLAN: 155
# (Centralized devices in standalone mode.) Display summary PPPoE session information on all
interfaces.
<Sysname> display pppoe-server session summary
Total PPPoE sessions: 2
Local PPPoE sessions: 1
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
