H3C MSR810, Command Reference Manual

Page: 43 / 389

31
Predefined user roles
network-admin
Usage guidelines
This command uses PPP usernames as DHCP client IDs for DHCP pool address assignment. The
DHCP pool can be an A AA-authorized address pool or an address pool configured by using
the
remote address
command.
Configure this command when different users use different PPP usernames to come online and PPP
usernames are required to be used as DHCP client IDs.
Examples
# Use the PPP usernames as the DHCP client IDs on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] remote address dhcp client-identifier username
reset ppp compression iphc
Use
reset ppp compression iphc
to clear IPHC statistics.
Syntax
reset ppp compression iphc
[
rtp
|
tcp
] [
interface interface-type interface-number
]
Views
User view
Predefined user roles
network-admin
Parameters
rtp
: Clears IPHC RTP header compression statistics.
tcp
: Clears IPHC TCP header compression statistics.
interface interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify this option, the command clears IPHC statistics on all interfaces.
Usage guidelines
If neither
rtp
nor
tcp
is specified, this command clears both RTP header compression and TCP
header compression statistics.
Examples
# Clear IPHC statistics on all interfaces.
<Sysname> reset ppp compression iphc
Related commands
display ppp compression iphc
timer-hold
Use
timer-hold
to set the keepalive interval on an interface.
Use
undo timer-hold
to restore the default.
Syntax
timer-hold seconds