H3C MSR810, Command Reference Manual

Page: 377 / 389

365
Predefined user roles
network-admin
Examples
# Enable MFR encapsulation on interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol mfr
Related commands
fr mfr
mfr bundle-name
Use
mfr bundle-name
to set a bundle name.
Use
undo mfr bundle-name
to restore the default.
Syntax
mfr bundle-name name
undo mfr bundle-name
Default
The bundle name is represented by MFR plus the bundle number, for example, MFR0/0/2.
Views
MFR interface view
Predefined user roles
network-admin
Parameters
name
: Specifies a bundle name, a case-sensitive string of 1 to 49 characters.
Usage guidelines
You cannot set a bundle name as a string in the form of MFR +
number
.
Each MFR bundle has a bundle name, and the peer device can identify an MFR bundle by using the
bundle name. Bundle names at the two ends of a bundle can be different. Bundle names must be
unique on the same device.
The bundle names at both ends are used during the bundle link negotiation phase. After changing
the bundle name of an MFR interface, you must execute the
shutdown
and
undo shutdown
commands on the interface to make the new bundle name take effect.
Examples
# Set the bundle name to
bundle1
for interface MFR 0/0/2.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] mfr bundle-name bundle1
Related commands
display mfr