H3C MSR810, Command Reference Manual

Page: 367 / 389

355
Syntax
default
Views
MFR interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The
default
command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the
display this
command in interface view to
identify these commands. Then use their
undo
forms or follow the command reference to restore
their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings for interface MFR 0/0/2.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] default
description
Use
description
to set a description for an MFR interface.
Use
undo description
to restore the default.
Syntax
description text
undo description
Default
The description of an MFR interface is
interface name Interface
, for example, MFR0/0/2 Interface.
Views
MFR interface view
Predefined user roles
network-admin
Parameters
text
: Specifies an interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Set the description to
mfr0/0/2-interface
for interface MFR 0/0/2.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] description mfr0/0/2-interface