257
new-pin
: Specifies the new PIN, a string of 4 to 8 digits.
Usage guidelines
A SIM/UIM card will be locked in the following circumstances:
•
Consecutive PIN modification failures.
•
Consecutive failures for enabling or disabling PIN authentication.
•
Consecutive PIN authentication failures.
If the SIM/UIM card is locked, the 3G modem cannot be used. To unlock the card, you can use
the
pin unlock
command. The new PIN is saved on the SIM/UIM card.
If PIN verification is enabled, use the
pin verify
command to save the new PIN on the device after
the SIM/UIM card is unlocked.
If you consecutively fail to unlock a card by using the PUK, the card will be locked permanently. To
unlock a permanently locked card, contact the service provider of the card.
Examples
# Use the PUK to unlock a SIM/UIM card.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] pin unlock 87654321 1234
PIN will be unlocked and changed to “1234”. Continue? [Y/N]:y
PIN has been unlocked and changed successfully.
Related commands
pin modify
pin verification enable
pin verification enable
Use
pin verification enable
to enable PIN verification for a 3G/4G modem.
Use
undo
pin verification enable
to disable PIN verification for a 3G/4G modem.
Syntax
pin verification enable
[
pin
]
undo pin verification enable
[
pin
]
Default
The default setting for this command depends on the modem model.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
pin
: Specifies the PIN of the SIM/UIM card, a string of 4 to 8 digits.
Usage guidelines
If PIN verification is enabled, PIN verification is performed after you perform any of the following
tasks:
•
Install a 3G/4G modem.
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
