H3C MSR810, Command Reference Manual

Page: 237 / 389

225
Parameters
output-pcr
: Specifies the peak output rate of ATM cells in kbps. For more information about the value
range, see Table 47 .
Usage guidelines
You can use this command as well as the
service cbr
,
service vbr-nrt
,
and
service vbr-rt
commands to set the service type and parameters of a PVC. If you execute this
command multiple times, the most recent configuration takes effect.
Examples
# Create a PVC named
aa
on the interface ATM 2/4/0, and set the VPI/VCI, service type,
and
output-pcr
to 1/101, UBR, and 100000, respectively.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-aa-1/101] service ubr 100000
# Create a PVC named
aa
in PVC-group 1, and set the VPI/VCI, service type, and
output-pcr
to
1/101, UBR, and 100000, respectively.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc-group 1
[Sysname-ATM2/4/0-pvc-group-1] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-group-1-pvc-aa-1/101] service ubr 100000
Related commands
service cbr
service vbr-nrt
service vbr-rt
service vbr-nrt
Use
service vbr-nrt
to set the PVC service type to VBR-NRT and set the related parameters.
Use
undo service
to restore the default.
Syntax
service vbr-nrt output-pcr output-scr output-mbs
undo service
Default
The service type of a PVC is UBR. The peak output rate of ATM cells equals the maximum
bandwidth of the interface to which the PVC belongs.
Views
PVC view
PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
output-pcr
: Specifies the peak output rate of ATM cells in kbps. For more information about the value
range, see Table 47 .