167
For the called party to receive the calling number, the connected service provider switch must
support transmitting calling numbers.
As a best practice, do not configure the calling number to be sent for voice services.
Examples
# Configure BRI 2/4/0 to include
8060170
as the calling number in outgoing SETUP messages.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn calling 8060170
Related commands
display isdn call-info
isdn caller-number
isdn carry calling-name
Use
isdn carry calling-name
to configure ISDN to include the calling-name field in outgoing
packets on an ISDN interface.
Use
undo isdn carry calling-name
to restore the default.
Syntax
isdn carry calling-name
undo isdn carry calling-name
Default
ISDN does not include the calling-name field in outgoing packets on an ISDN interface.
Views
ISDN interface view
Predefined user roles
network-admin
Usage guidelines
The command enables a called party to identify the name of a calling party attached to the interface.
You can execute the command only when no call is present on the ISDN interface.
Examples
# Configure ISDN to include the calling-name field in outgoing packets on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn carry calling-name
Related commands
isdn carry connected-name
isdn carry connected-name
Use
isdn carry connected-name
to configure ISDN to include the connected-name field in outgoing
packets on an ISDN interface.
Use
undo isdn carry connected-name
to restore the default.
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
