H3C MSR810, Command Reference Manual

Page: 177 / 389

165
isdn bri-slipwnd-size
Use
isdn bri-slipwnd-size
to set the sliding window size on an ISDN BRI interface.
Use
undo isdn bri-slipwnd-size
to restore the default.
Syntax
isdn bri-slipwnd-size window-size
undo isdn bri-slipwnd-size
Default
The sliding window size is 1 on an ISDN BRI interface.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
window-size
: Specifies a sliding window size in the range of 1 to 7.
Usage guidelines
Q.921 sends frames in order of their sequence numbers and requires an acknowledgment of each
transmitted frame. The sliding window mechanism enables Q.921 to send multiple continuous
frames without waiting for the acknowledgment of the previous frame. The sliding window size sets
the maximum number of unacknowledged frames. You can tune the size depending on t he link
status to maximize the throughput.
When sending a frame, Q.921 checks the number of unacknowledged frames. Suppose V(A) is the
sequence number of the previous acknowledged frame, V(S) is the sequence number of the frame to
be sent, and k is the sliding window size. If V(A) + k = V(S), the system stops sending frames.
Examples
# Set the sliding window size to 7 on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn bri-slipwnd-size 7
Related commands
isdn pri-slipwnd-size
isdn caller-number
Use
isdn caller-number
to configure calling number verification for incoming calls.
Use
undo isdn caller-number
to restore the default.
Syntax
isdn caller-number caller-number
undo isdn caller-number
Default
An ISDN interface accepts calls from any calling numbers.