5
•
A minimum clearance of 0.8 m (2.62 ft) is reserved between the rack and walls or other devices
for heat dissipation and maintenance.
•
The headroom in the equipment room is not less than 3 m (9.84 ft).
Installation tools and accessories
Figure1-2 Installation tools
Figure1-3 Installation accessories
Pre-installation checklist
Table1-4 Pre-installation checklist
Item
Requirements
Result
Installation
site
Ventilation
•
A minimum clearance of 100 mm (3.9 in) is reserved
around the chassis.
•
The installation site has a good ventilation system.
Flat-head
screwdriver
Phillips
screwdriver
Needle-nose
pliers
Wire stripper
EDS wrist strap
Diagonal pliers
Heat gun
Network cable tester
Multimeter
Marker
Grounding cable
M6 screw (user supplied)
Mounting brackets
(including M4 screws)
Drive carrier
Power cord
Console cable
Rubber feet
Power cord retainer clip
Drive fastening screw
PoE adapter (supported only by
MSR3610-I-IG/3610-IE-IG)
