19
Restoring the VM
About this task
Perform this task to restore the VM by using a .vmb backup file.
Procedure
1.
Enter VMM view.
<H3C> system-view
[H3C] vmm
2.
Restore the VM from file
md0:/EAD_VM.vmb
.
[H3C-vmm] restore pakagepath md0:/EAD_VM.vmb
Exporting the VM to a .pkg file
About this task
Perform this task to export the VM to a .pkg file after the VM is stopped. You can use the .pkg file to
deploy the VM on another EAD gateway or use the .pkg file to redeploy the VM on the current EAD
gateway.
Procedure
1.
Enter VMM view.
<H3C> system-view
[H3C] vmm
2.
Export the VM to file
md0:/EAD_VM.pkg
.
[H3C-vmm] export vm EAD_VM md0:/EAD_VM.pkg
Uninstalling the VM
Restrictions and guidelines
Perform this task to uninstall the VM after the VM is stopped.
Procedure
1.
Enter VMM view.
<H3C> system-view
[H3C] vmm
2.
Uninstall VM
EAD_VM
.
[H3C-vmm] uninstall vm EAD_VM
Adding a disk to the VM
Restrictions and guidelines
Before you add a disk to the VM, you must create the disk.
If you add the disk to the VM when the VM is started, you must restart the VM for the add operation
to take effect.
If you add the disk to the VM when the VM is stopped, you must start the VM for the add operation to
take effect.
