17
Before removing the damaged SIC-M2-SATA drive, you must press the remove button and wait for
the button light to go out.
Make sure the new SIC-M2-SATA drive has only one partition and the file system format is EXT4.
This task will clear all data from the new SIC-M2-SATA drive.
Procedure
1.
Enter RAID view.
<H3C> system-view
[H3C] raid
[H3C-raid]
2.
Restore RAID
md0
.
[H3C-raid] restore raid md0
Removing a RAID
Restrictions and guidelines
Removing a RAID also clears all data from the member SIC-M2-SATA drives of the RAID.
Procedure
1.
Enter RAID view.
<H3C> system-view
[H3C] raid
[H3C-raid]
2.
Remove RAID 1.
[H3C-raid] remove raid md0
Displaying RAID status information
# Display RAID status information.
<H3C> display raid status
Name Level Status Disks Resync Size(GB)
--------------------------------------------------------------------
md0 raid1 active hdb0[0]hdc0[1] Done 447
Managing VMs
The built-in VM on the EAD gateway is installed in the root directory of RAID
md0
. The file saving
path and hard disk path in the following examples both use the root directory of RAID
md0
. If
external hard disk
hda0
is inserted into the EAD gateway, you can specify a directory on
md0
or
hda0
to save hard disk files and other files.
Starting the VM
1.
Enter VMM view.
<H3C> system-view
[H3C] vmm
2.
Start VM
EAD_VM
.
[H3C-vmm] start vm EAD_VM
