34
SIC-3G-CDMA
Introduction
The SIC-3G-CDMA module is used to access 3G WLANs. It supports:
•
CDMA 2000 1x RTT
•
1x EV-DO Rev.0
•
1x EV-DO Rev.A
Interface specifications
Table 48 Interface specifications
Item Description
Connector type
•
TNC RF: Antenna for accessing WLANs.
•
RJ-45: For connecting to a third-party WLAN debugging and testing
software such as CAIT of Qualcomm.
Number of connectors
•
2
TNC
RF
•
1
RJ-45
Interface standard
•
TNC RF: Omni antenna, supporting CDMA 2000 1 No RTT, 1 No EV-DO
Rev.0, 1 No EV-DO Rev.A.
•
RJ-45:
RS-232
Cable type
•
TNC RF: None
•
RJ-45:
AUX
cable
Rates
Network standards:
•
1 No EV-DO Rev.A (Downlink: 3.1 Mbps, uplink: 1.8 Mbps)
•
1 No EV-DO Rev.0 (Downlink: 2.4 Mbps, uplink: 153.6 Kbps)
•
1 No RTT (Downlink: 153.6 Kbps, uplink: 153.6 Kbps)
Services
•
CDMA 2000 1x RTT
•
1 No EV-DO Rev.0
•
1 No EV-DO Rev.A
Interface LEDs
Figure 39 SIC-3G-CDMA panel
Table 49 LED description
LED Description
WWAN
•
Steady green indicates that a link is present.
•
Flashing green indicates that data is being transmitted or received.
RSSI
•
Steady green indicates strong signal.
•
Flashing green indicates middle or low signal.
•
Off indicates weak signal or no signal.
Summary of Contents for MSR Router Comware 5 Series
Page 9: ...iv Index 209...
