16
selective-flooding mac-address
Use
selective-flooding mac-address
to enable selective flood for a MAC address.
Use
undo selective-flooding mac-address
to disable selective flood for a MAC address.
Syntax
selective-flooding mac-address
mac-address
undo selective-flooding mac-address
mac-address
Default
Selective flood is disabled for all MAC addresses.
Views
VSI view
Predefined user roles
network-admin
Parameters
mac-address
: Specifies a MAC address. The MAC address cannot be all Fs.
Usage guidelines
This command excludes a remote MAC address from the flood suppression done by using the
flooding disable
command. The VTEP will flood the frames destined for the specified MAC
address to remote sites when unknown-unicast floods are confined to the local site.
Examples
# Enable selective flood for
000f-e201-0101
on VSI
vsi1
.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] selective-flooding mac-address 000f-e201-0101
Related commands
flooding disable
service-class
Use
service-class
to set a service class value for outgoing VXLAN packets.
Use
undo service-class
to restore the default.
Syntax
service-class service-class-value
undo service-class
Default
No service class value is set for outgoing VXLAN packets.
Views
VSI view
Predefined user roles
network-admin
