Installation Manual
H3C SecPath F1000-S Firewall
Chapter 8 Multifunctional Interface Modules
8-16
Figure 8-21
SSL module
8.7.3 Module Attributes
Table 8-9 shows the attributes of the SSL module.
Table 8-9
SSL module attributes
Attribute
Description
Supported protocol
SSL
Hardware algorithm
Key algorithm (DES, 3DES, AES and RC4)
Authentication algorithm (HMAC-MD 5and HMAC-SHA-1)
8.7.4 Panel and Module LEDs
Figure 8-22 shows the panel of the SSL module.
Figure 8-22
SSL module panel
Table 8-10
LEDs on the SSL module
LED
Description
STATUS
ON means module is not powered normally;
OFF means the module is not powered, or the power supply is
OFF or in fault.
ACTIVE
Blinking for two seconds and then OFF means the module
initialization is completed; blinking continuously means the
module is normal and packets are being transmitted/received on
the interface; OFF means the module is normal but no packets are
being transmitted/received on the interface; .
