Installation Manual
H3C SecPath F1000-S Firewall
Chapter 8 Multifunctional Interface Modules
8-10
Attribute
1GBE
2GBE
Operating mode
10/100/1000 Mbps, auto-sensing
Full/half duplex auto-negotiation
8.5.4 Panel and Interface LEDs
Figure 8-13 and Figure 8-14 show respectively the panel of the 1GBE and 2GBE
modules.
Figure 8-13
1GBE module panel
Figure 8-14
2GBE module panel
Table 8-6 describes the LEDs on the 1GBE/2GBE module panel and how to read their
state.
Table 8-6
LEDs on the 1GBE/2GBE module
LED
Description
LINK
OFF means no link is present; ON means a link is present.
ACT
OFF means no packets are being transmitted/received on the interface;
blinking means packets are being transmitted/received on the interface.
8.5.5 Interface Cable
I. Ethernet cable
The 1GBE/2GBE module uses a category-5 twisted-pair cable with RJ-45 connectors
(see Figure 8-15). Pins 1 and 2 of the connectors are for transmitting data, and Pins 3
and 6 are for receiving data.
