Installation Manual
H3C SecPath F1000-S Firewall
Chapter 2 Preparation for Installation
2-4
z
Always wear an ESD-preventive wrist strap when installing and maintaining the
firewall, making sure the strap has good skin-contact.
z
Do not hot-swap the console cable and auxiliary cable.
z
Do not look directly into the fiber Tx port or the optical connector connected to it.
z
You are recommended to use Uninterrupted Power Supply (UPS) for the firewall.
2.3 Unpacking and Inspection
Check the arrived shipment against the packing list, making sure all the items are
included and in good condition. Contact your agent for shortage or wrong delivery.
2.4 Tools, Meters, and Devices
I. Tools
z
Phillips screwdriver
z
Flat-blade screwdriver
z
ESD-preventive wrist strap
z
Static shielding bag
II. Cables
z
Grounding wire and power cord
z
Console cable
z
Optional cables
III. Meters and devices
z
HUB or LAN switch
z
Console terminal (or PC)
z
Optional interface module-related device
z
Multimeter
Note:
The installation tools, meters and devices are not shipped with the firewall.
