5
Status: Registered
MAC Address: 00e0-fa1e-03da
Interface: Ten-GigabitEthernet1/0/2
Last registered: 02/08/2011 13:00:00
Table 1 Command output
Field Description
Status
Status of the OAP client, which is always
Registered
.
MAC Address
MAC address of the OAP client.
Interface
Interface used to communicate with the OAP client.
Last registered
Registration time of the client.
Related commands
display oap client info
oap client close
Use
oap client close
to shut down an OAP client.
Syntax
oap client close
client-id
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
client-id
: Specifies an OAP client by its ID in the range of 1 to 255. Client IDs are assigned by the
OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
This command applies only to OAP clients on Linux.
When you execute this command for a client in registered state, the OAP manager sends a
shutdown notification to the specified OAP client. The client stops after receiving the notification.
When you execute this command for a non-existent client, an error message appears.
Examples
# Shut down OAP client 1.
<Sysname> system-view
[Sysname] oap client close 1
Related commands
display oap client summary
oap client reboot
