Quick Start
H3C S5100-SI/EI Series Ethernet Switches Chapter 3 Installing the Switch
3-34
Step 1: Connect the DB-9 female connector of the Console cable
to the serial port of the PC or the terminal device used to configure the
switch.
Step 2: Connect the RJ-45 connector of the Console cable to the
Console port of the switch.
Caution:
Identify the label of the port before connecting a connector.
Note:
If the switch has been powered on,
z
First connect the DB-9 connector of the console cable to the PC
before connecting the RJ45 connector to the switch.
z
Disconnect the DB-9 connector of the console cable from the PC
after disconnecting the RJ45 connector from the switch.
