9
2.
Place the firewall upside down on the workbench and clean the four round holes in the chassis
bottom with a dry cloth.
3.
Attach the four rubber feet to the round holes in the chassis bottom.
4.
Place the firewall with upside up on the workbench.
Figure2-1 Mounting the firewall on a workbench
Installing the firewall in a standard 19-inch rack
WARNING!
To avoid bodily injury and device damage, use a minimum of two persons to rack-mount the firewall.
CAUTION:
As a best practice, use slide rails together with the mounting brackets to support the weight of the
chassis.
To install the firewall in a standard 19-inch rack:
1.
Unpack the firewall and accessories.
2.
Mark the cage nut installation positions on the rack posts by using the mounting brackets.
Use a front mounting bracket to mark the installation positions on the front rack posts and use a
rear mounting bracket to mark the installation positions on the rear rack posts. Install cage nuts.
Figure2-2 Installing cage nuts
