14
You can continue to install the operating system.
Configuring iSCSI SAN
This document uses Windows and RHEL 7.5 as examples to describe how to configure iSCSI SAN
for the network adapter.
Windows operating systems
1.
Assign an IP address to the network interface on the network adapter that connects to the iSCSI
network storage device. Make sure the host and iSCSI storage device can reach each other.
Figure 27 Configuring the local IP address
2.
Enable and configure iSCSI.
a.
Open
Control Panel
, and then click
iSCSI Initiator
. Click
OK
on the dialog box that opens.
Figure 28 Clicking iSCSI Initiator
b.
Click the
Configuration
tab, click
Change…
, and then configure the name of the local
iSCSI initiator.
