6
Installation guidelines
The ANT-2503C-S is designed to be mounted indoors on a ceiling to maximize its omnidirectional
propagation.
Install multiple antennas where necessary because doors, windows, and walls degrade signal
quality.
Keep the antenna away from metal obstructions and wire mesh.
Choosing a mounting location
The ANT-2503C-S is typically mounted indoors on the ceiling. Keep the antenna away from
obstacles and metallic objects such as heating and air-conditioning ducts, large ceiling trusses, and
primary power transmission systems.
Typically, the higher an antenna is above the ground, the larger the signal coverage area.
If possible, use a cable as short as possible to connect the antenna and AP.
Mounting the antenna
You can mount the ANT-2503C-S antenna on a ceiling. The installation accessories are provided
with the antenna (installation tools are user supplied). If you intend to mount your antenna in a way
other than what is described in this document, you must provide the installation accessories yourself.
Installation tools
The following tools are required for installing the antenna
•
One electric drill and drill bits
•
One adjustable wrench
Mounting the antenna on a ceiling
1.
Drill an 18 mm (0.71 in) diameter hole in the ceiling where you want to mount the antenna.
2.
Remove the flat washer from the antenna and place it above the ceiling.
3.
Thread the antenna cable through the hole you drilled in step 1 until the antenna is flush with the
ceiling.
4.
From above the ceiling, slide the flat washer down onto the antenna’s thread and fasten it until
the antenna is secured in place.