H3C ANT-2011P Installation Manual Download Page 4

Manual Version:5PW100-20120627 

Figure 3

 

Vertical pattern 

 

 

Safety precautions 

 

 

WARNING! 

 

Installing antennas is dangerous. For your safety, follow the installation directions. 

 

Keep the antenna away from power source, street lamps, distribution box, or other places that may 
cause electrical shock. 

 

Do not touch any power lines for your safety. 

 

 

Keep safety in mind when you select your installation site. Keep the antenna away from electric 
power lines and other lines. 

 

Do not work alone when you install the antenna. 

 

If you need to raise the mast, work with other people to avoid bodily injury. 

 

Do not use a metal ladder. Do not work on a wet or windy day. Dress properly, for example, shoes 
with rubber soles. Wear rubber gloves. 

 

If the antenna, antenna cable, or any other installation accessory drops, get away from it to avoid 
bodily injury. 

 

If an accident, for example, electrical shock, occurs with the power lines, immediately call for 
qualified emergency help. 

Installation guidelines 

To ensure the best possible performance of the antenna, follow these guidelines: 

 

Install the antenna vertically and make sure the antenna bottom faces downwards. 

Summary of Contents for ANT-2011P








Reviews: