▼
Disassembly, cleaning and assembly before using
When you are new to this product, please clean to decompose the body, and then use.
1.
Please remove the parts by loosening the screw
on the cap, bottle and base.(See the figure A)
*The cap, bottle and base are plastic, thus please
don’t use steal scourer and sponge easy to
scratch.
There is electrical parts inside the base.
Degradation or failure is expected when water
enters inside jack of backside. Please fitted the
cap tightly and wipe it
2.
Please assemble this product. (See the figure B)
* Please confirm that there is grey packing
inside of base and cap.
3.
Please put beverages into the bottle
(It contains about 350cc)
*Please strongly tighten bottle and base.
Otherwise it become a reason of water leak.
4.
Please close the cap, lightly shake the body and
check water leak of cap and base.
*There are cases where water is left in between the bottle and the base. Please wipe well
the moisture inside of base and bottle.
