20
TEMPERATURE CONTROLLER
1. GENERAL SAFETY INSTRUCTIONS
When handling electrical items, the VDE regulations need to be followed.
Especially VDE 0100, VDE 0550/0551, VDE 0700, VDE 0711 and VDE
0860
– Before opening the device, make sure that it is disconnected from the mains.
– Tools may only be used on the device or components, if it is ensured, that the
device has been disconnected from the mains and that all electric charges,
that have been stored within the components, are discharged.
– Cables or leads connecting the device or connecting components within the
device should be examined thoroughly for faults in the insulation.
– If a fault in the cables of the device is found, the device should immediately be
removed from service until the defective cables have been replaced.
If the following manual does not fully describe function and safety precautions
to a layman, or if the technical appliance is not clear, or if it is unclear which
external devices may be attached and how to attach them, then it is vital to
contact a specialist for advice.
Before mounting this device and connecting the accessories, make sure, that
this device is suitable for the intended use.
If there is any case of doubt or there are any questions, please contact specialists,
experts or the manufacturers of the modules and components. Please note, that
operating and connection errors are beyond our influence and that we cannot
maintain warranty or be made liable for damages occurring thereof.
This item was tested and manufactured according to EMVG (EG Directive
89/336/EWG/ Electromagnetic Compatibility) and holds the corresponding
CE approval. Any change of the circuitry or exchange of components other
than specified will make this approval invalid.
