OPERATION INSTRUCTION
1.First please make sure charge the battery and the charging voltage must according to the
instruction manual, then insert the charging plug into the charger or main body charging hole
for charging(unit assembly method according to figure 1 or figure 2).When the unit in charge,
handheld vacuum cleaner indicate lamp twinkle continuously. When the indicate lamp
extinguish light, the battery is in full charge, then we can use the unit.
2. When the unit in discharging, the indicate lamp twinkle continuously or the unit there is no
suction or the motor is not rotate, please charge the battery.
3.Use the motorized brush for cleaning, as the figure 6 showing, please press the switch
button1 or switch button2,the vacuum cleaner will start to work, hold the handle then pull
downward, put down the main body and hold the handle move all around, then clean the
floor or carpet. After finishing cleaning, the unit upright forward and put the limited rib of the
main body into the relevant position of the brush.
4.Use the handheld vacuum cleaner for cleaning(as figure 6,7,8),take out the handheld from
the unit,use it separately or match with the flat brush and crevice for cleaning the sofa,
desktop, tablecloth, curtain ,the inner car, computer keyboard etc areas; the hard cleaning
area: corner, floor gap area please use the crevice brush for cleaning.
Move all around, clean the floor or carpet
Switch button 1
Switch button 2
Figure 5
Summary of Contents for UP370
Page 12: ...Figure 11 Brushroll cover after pulling ...
Page 14: ......
