5
18. Same method applies to rudder.
16. Install push rods onto the control horns, hook up to
the rod adjuster and tighten the grub screw when the
control surfaces are perfectly levelled.
17. Install push rod holder onto the fuselage. Align the
hole on the holder in a straight line. Thread the elevator
push rods thru the holes of the holders as shown. Try to
align the push rod to the push rod holder, servo control
horns in a straight line to make sure the rod moves
without stiction.
19. Hot glue the motor mount onto the fuselage.
20. Install a motor mount on the plywood mount.
