Gymna V-ACTOR II, Accessory Manual

Page: 8 / 17

6 Version 252 of 2018-04-06
 Place the V-ACTOR into the V-actor holder, after installing the V-actor holder.
ShockMaster300
ShockMaster500
 To break the connection, pull the outside of the plug body. This means the locking function
is initially released, then the plug is pulled out of the handpiece connector. (2)
2.3.1 Compatibility
The V-ACTOR II handpiece can be connected to the ShockMaster control units from the
manufacturer GymnaUniphy NV.
2.3.2 How to change the transmitters
 To remove the 25 mm applicator, unscrew the black cap (1) from the handpiece and
pull out the applicator. (2)
 Screw the new applicator on to the handpiece until finger tight.
1
2