GW Instek PEL-2000B Series, User Manual

Page: 142 / 317

PEL-2000B Series User Manual
142
Response speed settings will be
reflected in the Current Operation
Channel Status panel.
CVH
CH1
Slow
main
80V
CV Slow Response
CV Fast Response
Slow
Fast
Note
Changing the response speed will only affect the
current (active) channel. Other channels will not be
affected by any changes.
Select CP Mode
Background
The PEL-2000B series electronic load operates in
four different modes, Constant Current (CC),
Constant Resistance (CR), Constant Voltage (CV),
and Constant Power (CP).
CP mode cannot be used with the dedicated
Group Unit mode.
When a channel is active, the F1 key
can be used to switch between each
operating mode.
F1 F5
~
F1
Mode
CC
Mode
CR
Mode
CV
Mode
CP
Panel Operation
1. Press the CHAN button and use
the selector knob to select a
channel.
CHAN
LOCAL
2. Press F1 until CP mode is
displayed in the display panel.
F1 F5
~
F1
Configure Configure
Mode
CP
Range
Low