APS-7000 Series User Manual
92
SCPI Emulation
The SCPI Emulation setting supports both GW Instek as well as
EXTECH SCPI remote commands. When set to EXTECH, the SCPI
Emulation setting allows the APS-7000 to be a drop-in replacement
for the EXTECH 6700 series by emulating the remote commands of
the EXTECH units.
Steps
1.
Press the
Menu
key. The Menu
setting will appear on the display.
Menu
2.
Use the scroll wheel to go to item 4,
MISC
Configuration
and press
Enter
.
3.
Go to the
SCPI Emulation
setting using the
scroll wheel and press
Enter
. Choose the SCPI
emulation mode and press
Enter
again to
confirm.
SCPI Emulation
GW, EXTECH, N/A
Exit
4.
Press
Exit[F4]
to exit from the
MISC Configuration settings.
Example
Settings
Summary of Contents for APS-7000 Series
