PPX Series User Manual
210
A
PPENDIX
PPX Factory Default Settings
The following default settings are the factory configuration settings
for the power supply.
For details on how to return to factory default settings, see page 62.
Initial
Default Setting
Output
Off
LOCK
Disabled
Voltage Set
0.000 V
Current Set
0.0000 A
Output
Default Setting
Output On Dly(Delay)
00(hour):00(minute):00.00(sec)
Output Off Dly(Delay)
00(hour):00(minute):00.00(sec)
Remote Sense
2 Wire
V/I Slew Rate
CVHS = CV high speed priority
R_V(Rising Voltage) Slew Rate
0.001 V/ms (PPX-10H01)
0.0001 V/ms (Other)
F_V(Falling Voltage) Slew Rate
0.001 V/ms (PPX-10H01)
0.0001 V/ms (Other)
R_C(Rising Current) Slew Rate
0.00001 A/ms (PPX all series)
F_C(Falling Current) Slew Rate
0.00001 A/ms (PPX all series)
Measurement
Default Setting
Measure Average
Off
Voltage Range
Auto
Current Range
Auto