K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
32
○
R
——Parameter“Read external sensor after monitor period expire”
To set whether to send read request telegram to external sensors after the monitoring period expires.
Options:
NO
YES
NO
：
Do not send read request telegram.
YES
：
After the monitoring period expires, if the screen does not receive the detection value of the external
sensor, a read request message will be sent to the external sensor.
Attention: Since the LCD screen heating is large, if the internal sensor is used to measure the
temperature, the recommended off backlight time set to 5~15s , otherwise the measured temperature
error is larger.
Note:
As the LCD screen heating is large, if the use of internal sensors to measure temperature, it is
recommended to turn off the backlight time set to 5~15s, otherwise the measurement of the temperature error is
large.
6.3 Parameter“Main page setting”
Figure 6.3_1 Parameter“Main page setting”settings interface
Used to set the layout and page navigation features of the home page, you can set up to 9 pages of
navigation depending on the product type.
The parameters for each navigation are the same, and you can choose to link to the specified feature page.
The following is an example of a navigation feature that describes their parameter settings.
Parameter“Description for main page function”
The name of the home page
，
maximum 15 characters, the actual display of up to 5 Chinese characters.
Parameter“Main page navigation function”
Sets whether the home navigation function is enabled
。
Available options
：
Tip
：
10.1 inch Touch Panel does not apply to the main page setting.
