K-BUS
®
KNX/EIB
Dimming Actuators
30
3.5. LED Dimming Actuator, 4fold, 4A ADLD-04/03.1
Dimension drawing:
Connection Diagram:
1
Bus connection terminal
2
Programming button, for assigning the physical address
3
Red LED for entering the physical address, green LED flashing for application layer running normally
4
Indicate over voltage, the LED ON if normal; when the input voltage>26V DC, the LED is flashing; when the input
voltage>30V DC, the LED is flashing quickly and the output is off
5
Indicate over-temperature, the LED ON if normal; when the Temp.>70°C, the LED is flashing and the brightness value is
lowered 5% per ↑0.5°C
6
Output terminals
7
LEDs of indicating output status for each channel. And when the output current>4A , the LED is flashing; when the output
current>5A , the LED is flashing and the output is off
8
Manual buttons, switch via short operation, relative dimming via long operation
9
Input terminals, input voltage 12-24 V DC
Input
12-24V DC
