Mobile NVRs M1184 / M1284 Quick Start Guide
11
Access Motherboard
M1284
In order to install hardware or maintain the mobile NVR, you often have to open the mobile NVR and
further access the motherboard. The mobile NVR features modular mechanical design to facilitate the
work. Follow the guide below to open the mobile NVR and access the motherboard.
1.
Place the mobile NVR on a flat and soft surface. Find the SATA storage tray knobs perching on one
side of the mobile NVR. First loosen the knobs and then slide out and fully remove the trays from the
mobile NVR.
2. Use a hex wrench to loosen and remove the screws as marked in the illustration below. Then
dismantle the bottom, front and rear panels from the mobile NVR.
M1184
