8
Getting Started
To remove the transport bolts:
1. Use a spanner to loosen the bolts. They are located
at the rear of the washing machine.
2. Pull the bolts out horizontally. Make sure the entire
bolt is removed.
3. Push the transport hole plugs (included with your
accessories) into the respective bolt holes.
You’ll need the transport bolts again if you move the washing machine, so make sure
you keep them in a safe place.
Moving the washing machine from one location to another
Before you move the washing machine:
• Shut off the tap and run the washing machine to drain the water. Drain any remaining
water from the pump hose.
• Disconnect the mains cable.
• Attach the transport bolts.
NOTE: Make sure to fix the transport bolts prior to moving the washing machine.
Two or more people are required to move
the washing machine.
Levelling the washing machine
There are levelling feet on the underside of the washing machine. They must be adjusted
to make sure the washing machine is level.
1. On each foot, loosen the lock ring by turning it
clockwise.
2. Adjust all feet by rotating each upwards or
downwards.
3. Use a spirit level to ensure the washing machine is
level.
4. Tighten each lock ring by turning them anti-clockwise
(towards the washing machine body).
Ensure all lock rings are tightened securely. Check that the feet are still bolted to the
washing machine - if they’re unbolted, the washing machine will move around.
