9
Always lift pans off the ceramic hob - do not slide, or they may scratch the glass.
USING YOUR CERAMIC HOB
To start cooking
1. Place a suitable pan on the cooking zone that you wish
to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
2. Touch the ON/OFF key for 1 seconds.
After power on, the buzzer beeps once, all displays show
“0“, indicating that the ceramic hob has entered the state
of standby mode.
3. According to the heating zone where the pan is placed, select a relevant zone select
key by pressing key (A). The symbol 0. selected will be flashing.
4. Adjust heat setting by touching the slider regulating key(C) control.
POWER DOWN
POWER UP
• If you don’t choose a heat setting within 20 seconds, the ceramic hob will
automatically switch off. You will need to start again at step 2.
• You can modify the heat setting at any time during cooking.