mega macs PC
16. Select additionally required parameters in the list
Available parameters:
by double-clicking if required.
You can select maximum 16 parameters at the same time.
17. Start the parameter reading with
.
During the readout procedure, the recordings are automatically saved in the Car History under the previously
entered registration number.
NOTE
A light blue bar in the top toolbar indicates how much of the memory space reserved for this
purpose in the Car History has been used. If the blue bar is complete, the first data of the
present measurement will be removed from the memory and the free capacity is filled with
new data.
18. Press
to cache the records of the selected parameters.
The recordings are saved in the Car History.
The parameter readout will start again afterwards.
19. Return to the list of parameter selection with
.
11.5.4 Actuators
Use this menu to activate components in electronic systems. You are hence able to check basic functions and cable
connections of those components.
11.5.4.1 Activating the Actuator
DANGER
Rotating/moving parts (electric fan, brake calliper piston, etc.)
Danger of cutting or pinching fingers or device parts
Remove the following things from the danger zone before actuating actuators:
•
Limbs
•
Persons
•
Device parts
•
Cables
Proceed as follows to activate the actuator:
1. Perform steps 1 to 11 as described in the section
CAUTION
Pulling off of the PC VCI when actuating the clutch
Risk of injury or material damage
Proceed as follows before starting:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with infos and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the PC VCI
Danger of destruction of automotive electronics
Switch off ignition before connecting the PC VCI to the vehicle.
67