GUSMER
Model D Spray Gun
6
2943J-1-ID Issue 2
SOLVENTS AND CHEMICALS
It is the users responsibility to insure that adequate personal protective
measures are taken so as not to exceed the Threshold Limit Value (TLV)
of the products being used, as established by the Occupational Safety and
Health Administration or other qualified agency. The user must be aware
of the exposure limits specified for the products being used, and must use
them in accordance with the recommendations specified by their
manufacturer.
HIGH VOLTAGE
The electrical service should be installed by a qualified electrician. Entry
into any of the electrical components should be made only by trained and
qualified personnel.
HIGH PRESSURE
The Power Pack system can develop pressures up to 3,000 pounds per
square inch. Anyone using a spray gun or mix head must use extreme
caution to insure the gun or head is never pointed at or near any persons,
and that the head is never actuated with the outlet tip blocked or restricted
by any part of the body.
PERSONAL PROTECTION
The use of solvents and chemicals will be required when operating,
servicing or cleaning. To prevent excessive exposure to the chemicals and
solvents to which will be used when operating this equipment, appropriate
personal protective gear such as eye and face protection, respiratory
protection, and protective gloves and clothing may be required.
HIGH TEMPERATURE
There are high temperature components, particularly the primary heater.
Before performing maintenance, allow the component to cool to avoid
bodily injury from hot fluid or hot metal.